AT Command Set for Nokia 8210 13Copyright © 2000. Nokia Mobile Phones. All rights reserved.: type of subaddress octet in integer format (GSM 04.08, subclause10.5.4.8); default 128 is a sum of integers each representing a class of information (default 7equals to all classes):1 voice2 data4 faxalso all other values below 128 are reserved 1...30 when "no reply" is enabled or queried, this gives the time in secondsto wait before call is forwarded, default value 20:0 not active1 active+CCWA Call WaitingControls call waiting supplementary service and presentation of +CCWA unsolicitedresult code. When status request response from network indicates that SS is activefor specific data bearer services (e.g. 'circuit async'), AT interface shall only indicate'data' (=2) ('not active' case is displayed only when SS is not active to any service;i.e. +CCWA: 0,7). (GSM 07.07 section 7.11. )Syntax:AT+CCWA=,,When =2: the response is+CCWA: ,[+CCWA: ,[...]] The default option is 0[,,7].AT+CCWA? Query current setting.Response is +CCWA:AT+CCWA=? Show supported values.Response is +CCWA:(list of supported's).Parameters: (sets/shows the result code presentationstatus in the TA):0 disable1 enable (when parameter is not given,network is not interrogated):0 disable1 enable2 query status is a sum of integers each representing aclass of information (default 7 equals to allclasses):1 voice2 data4 faxalso all other values below 128 arereserved:0 not active1 active
