AT Command Set for Nokia 8210 5Copyright © 2000. Nokia Mobile Phones. All rights reserved.Information Responses and Result CodesThe TA response for the example command line in the figure above could be asshown below. Here, the verbose response format is enabled with command V1 (seepage 52). If numeric format V0 would have been used, headers ofinformation responses would have been left out and final result code changed to0.Response to a command line(ETSI, GSM 07.07 version 5.4.0, chapter 4.2.)So called intermediate result codes inform about progress of TA operation (e.g.connection establishment CONNECT), and so called unsolicited result codes indicateoccurrence of an event not directly associated with issuance of a command from TE(e.g. ring indication RING).Command Line and Response Formatting CommandsThe table below summarizes the commands relating to command line and responseformatting. All are applicable to GSM terminals.Command See page DescriptionS3= 50 command line termination characterS4= 50 response formatting characterS5= 50 command line editing characterE 48 command echoQ 49 result code suppressionV 52 TA response formatX 52 defines CONNECT result code format;values manufacturer specific+CMEE= 20 ME error reporting controlSources:GSM 07.07: Digital cellular telecommunications system (Phase 2+); AT command setfor GSM Mobile Equipment (ME); version 5.40; Oct 1997.ITU-T Recommendation V.25ter - Serial asynchronous automatic dialling and control;Aug 1995, section 5.
