AT Command Set for Nokia 8210 41Copyright © 2000. Nokia Mobile Phones. All rights reserved.Parameters:: sets/shows the result code presentationstatus in the TA:0 disable1 enable: string type USSD-string (when parameter is not given, network is notinterrogated):- if indicates that GSM 03.38default alphabet is used:- if TE character set other than "HEX"(refer command Select TE CharacterSet +CSCS):ME/TA converts GSM alphabet intocurrent TE character set according torules of GSM 07.05, Annex A- if TE character set is "HEX": ME/TA converts each 7-bit character ofGSM alphabet into two IRA character longhexadecimal number (e.g. character P(GSM 23) is presented as 17 (IRA 49 and55))- if indicates that 8-bit datacoding scheme is used:ME/TA converts each 8-bit octet into twoIRA character long hexadecimal number(e.g. octet with integer value 42 ispresented to TE as two characters 2A(IRA 50 and 65)): GSM 03.38, Cell Broadcast Data CodingScheme in integer format (default 0):0 no further user action required (networkinitiated USSD-Notify, or no furtherinformation needed after mobile initiatedoperation)1 further user action required (networkinitiated USSD-Request, or furtherinformation needed after mobile initiatedoperation)+DR Data Compression ReportingThis command controls the presentation of +DR: intermediate result code.(V.25ter section 6.6.2.)Syntax:AT+DR= Set reporting mode. The default option is0.AT+DR? Query current setting.Response is +DR: AT+DR=? Show supported modes.Response is +DR:(list of supported's).Parameters:0 data compression reporting disabled1 data compression reporting enabledNONE data compression not in useV42B V.42bis in use in both directionsV42B RD V.42bis in use in receive direction onlyV42B TD V:42bis in use in transmit direction onlyMNP5 MNP5 in use
