|
AT Command Set for Nokia 8210 33Copyright © 2000. Nokia Mobile Phones. All rights reserved.Syntax:AT+CPMS=,< mem2>, Select preferred storage.Response is +CPMS: , ,, , , Default option is "MT","ME","MT" or"SM","SM","MT"AT+CPMS? Current setting query.Response is +CPMS: , ,, , , ,, , AT+CPMS=? Show supported values.Response is+CPMS: (list of locations), (list of locations), (listof locations)Parameters: "ME""SM" "ME""SM" "MT"+CPWD Change PasswordChanges passwords of SIM/ME/network features. "AB" = network/barring password.(GSM 07.07 section 7.5.)Syntax:AT+CPWD=,,AT+CPWD=? Show supported values.:"P2" SIM PIN2 refer to command +CLCK (seepage 18) Facility Lock for other values, : string type; shall be the same as passwordspecified for the facility from the ME user interface or with command ChangePassword +CPWD and is the new password; maximum length ofpassword can be determined with : integer type maximum length of the password for the facility+CR Service Reporting ControlThis command controls the presentation of the +CR intermediate result code. Ifenabled, the result code is transmitted at the point during the connect negotiationduring which the speed and quality of service to be used have been determined,before any error control or data compression reports are transmittted, and before anyfinal result code (e.g., CONNECT) is transmitted. (GSM 07.07 section 6.9.)Syntax:AT+CR= Set service reporting control mode. Thedefault option is 0.AT+CR? Query current setting.Response is +CR:.AT+CR=? Show supported values.Response is +CR:(list of supported's).Parameters for :0 Disable reporting.1 Enable reporting.
|
