Nokia 9000i communicator User Manual

Also see for 9000i: Quick guide Application guide Owner's manual Service manual

Contents

Nokia 9000i communicator User Manual Manual pdf 63 page image

Chapter 7 - Internet 7-17 1998 Nokia Mobile Phones. All Rights Reserved.task seems to take too long).The selected special character is entered to theleft of the cursor by pressing Insert. The insertedspecial characters send a control signal to the re-mote computer – they are not displayed on thescreen.Press Zoom in if the whole emulated screen and,consequently, character size is too small. TheZoom out command returns the unzoomed view.When the view is being zoomed, the scroll keyscan be used to switch between the upper andlower parts of the terminal screen.Press Texts to activate the text transfer com-mands, see "Defining Telnet connections: Texttransfers" on page 7-17.Press Hang up to close the connection to thehost, end the data call and return to the Telnetapplication main view.The scroll up/down buttons can be used forscrolling the view. Scrolling does not affect thecursor position. Pressing any keyboard key re-turns the view to the cursor position.Text transfersThe purpose of the text transfer function is toenable you to download (capture) or upload(send) texts between the host computer and thecommunicator. This feature can be used, for ex-ample, to send pre-written mail messages to thecompany mainframe computer, or alternatively,copy received mail and then read it later, off line.Once you have connected to the host, press Textsin the Telnet or Terminal main view to access theText transfer view.To send text to the host computer:1 Press Send text.2 Open one of the folders shown and select thedocument you want to send.3 Press Send.While the text is being uploaded, the keyboard isinactive.To copy text from the host computer:1 Prepare the text reading application on thehost.2 Press Capture text. All interaction with thehost will be recorded in a file in the Down-loaded files folder. Control characters, exceptline changes, will not be stored.3 Press Stop capture to end the text captureprocess.Press Back to return to the previous set of com-mands.Figure 7-8