Tools Operator selection—Select Automatic to set the deviceto search for and select one of the available networks, orManual to manually select the network from a list ofnetworks. If the connection to the manually selectednetwork is lost, the device sounds an error tone and asksyou to reselect a network. The selected network must havea roaming agreement with your home network, that is, theoperator whose SIM card is in your device.Glossary: A roaming agreement is an agreementbetween two or more network service providers toenable the users of one service provider to use theservices of other service providers.Cell info display—Select On to set the device to indicatewhen it is used in a cellular network based onmicrocellular network (MCN) technology and to activatecell info reception.Enhancement settingsDefault profile—to set the profile that you want activatedeach time you connect a certain enhancement to yourdevice. See ‘Profiles—set tones’, p. 18.Automatic answer—to set the device to answer anincoming call automatically after 5 seconds. If the ringingtype is set to Beep once or Silent, automatic answer isdisabled.Voice commandsYou can use voice commands to control your device. Formore information about the enhanced voice commandssupported by your device, see ‘Voice dialing’, p. 22.To activate enhanced voice commands for startingapplications or profiles, you must open the Voice com.application and its Profiles folder. Press , and selectTools > Voice com. > Profiles; the device creates voiceR1112_en.book Page 102 Monday, February 13, 2006 4:20 PM
