Personalise your device Profiles—set tonesTo set and customise the ringing tones, message alerttones, and other tones for different events, environments,or caller groups, press , and select Tools > Profiles. Ifthe currently selected profile is other than General, theprofile name is shown at the top of the display in thestandby mode.To change the profile, press in the standby mode.Scroll to the profile you want to activate, and select OK.To modify a profile, press , and select Tools > Profiles.Scroll to the profile, and select Options > Personalise.Scroll to the setting you want to change, and press toopen the choices. Tones stored on the memory card areindicated with . You can scroll through the tone listand listen to each one before you make your selection.Press any key to stop the sound.connecting to the wireless network. When you activate theOffline profile, the connection to the wireless network isturned off, as indicated by in the signal strengthindicator area. All wireless phone signals to and from thedevice are prevented. If you try to send messages, they areplaced in the outbox to be sent later.Warning: In the offline profile you cannot make orreceive any calls, except make calls to certainemergency numbers, or use other features that requirenetwork coverage. To make calls, you must first activatethe phone function by changing profiles. If the devicehas been locked, enter the lock code.Warning: Your device must be switched on to useOffline profile. Do not switch the device on whenwireless device use is prohibited or when it may causeinterference or danger.To leave the Offline profile, press , and select anotherprofile. The device re-enables wireless transmissionsR1112_en.book Page 18 Monday, February 13, 2006 4:20 PM