Camera and Gallery• To send a video clip to the other party during an activecall, select Options > Send to caller.• To edit the video, select Options > Edit. See ‘Edit videoclips’, p. 39.Video settingsThere are two kinds of settings for the video recorder:Video setup settings and main settings. To adjust Videosetup settings, see ‘Adjust color and lighting’, p. 36. Thesetup settings return to the default settings after you closethe camera, but the main settings remain the same untilyou change them again. To change the main settings,select Options > Settings and from the following:Audio recording—Select On if you want to record bothimage and sound.Video quality—Set the quality of the video clip to High,Normal, or Sharing. If you select High or Normal, thelength of the video recording is restricted by the availableSharing (QCIF resolution, .3gpp file format). See ‘Videosharing’, p. 24.The Normal video clip is limited to 300 KB (approximately20 seconds in duration) so that it can be conveniently sentas a multimedia message to a compatible device. Somenetworks, however, may only support sending ofmultimedia messages with a maximum size of 100 kB.Contact your service provider or network operator formore information.Add to album—Select whether you want to save therecorded video clip to a certain album in Gallery. SelectYes to open a list of available albums.Show captured video—Select whether you want therecorded video clip to play automatically after therecording stops.Default video name—Define a name or select the date.Memory in use—Define the default memory store: deviceR1112_en.book Page 39 Monday, February 13, 2006 4:20 PM
