Tools data coverage and you select When available, the deviceperiodically tries to establish a packet data connection.Access point—The access point name is needed to useyour device as a packet data modem to your computer.ConfigurationsYou may receive trusted server settings from your networkoperator or service provider in a configuration message, orthe settings may be stored on your SIM or USIM card. Youcan save these settings to your device, view or deletethem in Configurations.Date and timeSee ‘Clock settings’, p. 13.See also the language settings in ‘General’, p. 93.PIN code, PIN2 code, and Lock code—You can change thelock code, PIN code, and PIN2 code. These codes can onlyinclude the numbers from 0 to 9. See ‘Glossary of PIN andlock codes’, p. 99.Avoid using access codes similar to the emergencynumbers to prevent accidental dialing of the emergencynumber.If you forget any of these codes, contact your serviceprovider.Autolock period—You can set an autolock period, atime-out after which the device automatically locks andcan be used only if the correct lock code is entered. Entera number for the time-out in minutes, or select None toturn off the autolock period.To unlock the device, enter the lock code.When the device is locked, calls may be possible to theofficial emergency number programmed into your device.R1112_en.book Page 98 Monday, February 13, 2006 4:20 PM
