Messaging message. In the navigation bar, you can see the messagelength indicator counting backwards. For example, 10 (2)means that you can still add 10 characters for the text tobe sent as two messages.Note: E-mail messages are automatically placed inOutbox before sending. If sending does not succeed,the e-mail is left in the Outbox with the Failed status.Tip! In Messaging you can also create presentationsand send them in a multimedia message. In themultimedia message editor view, select Options >Create presentation (shown only if MMS creationmode is set to Guided or Free). See ‘Multimediamessages’, p. 60.Tip! When you send a multimedia message to ane-mail address or a device that supports the receivingof large images, use the larger image size. If you arenot sure of the receiving device, or the network doesnot support sending large files, it is recommended thatReceive MMS and e-mail settingsYou may receive the settings in a text message from yournetwork operator or service provider. See ‘Data andsettings’, p. 55.For availability of and subscription to data services,contact your network operator or service provider. Followthe instructions given by your service provider.Enter the MMS settings manually:1 Select Tools > Settings > Connection > Access points,and define the settings for a multimedia messagingaccess point. See ‘Connection settings’, p. 95.2 Select Messaging > Options > Settings > Multimediamessage > Access point in use and the access pointyou created to be used as the preferred connection. Seealso ‘Multimedia messages’, p. 60.Before you can send, receive, retrieve, reply to, and forwarde-mail, you must do the following:R1112_en.book Page 54 Monday, February 13, 2006 4:20 PM