Make callserror message that the recipient cannot accept theinvitation.SettingsPerson-to-person connection settingsA person-to-person connection is also known as a SessionInitiation Protocol (SIP) connection. The SIP profile settingsmust be configured in your device before you can useVideo sharing. Setting up a SIP profile allows you toestablish a live person-to-person connection to anothercompatible device. The SIP profile must also be establishedto receive a sharing session.Ask your network operator or service provider for the SIPprofile settings, and save them in your device. Yournetwork operator or service provider may send you thesettings over the air or give you a list of the neededparameters.Share live video and video clipsTo receive a sharing session, the recipient must installVideo sharing and configure the required settings on theirmobile device. You and the recipient must both beregistered to the service before you can start sharing.1 Select Options > Share video > Live or Clip.If you selected Clip, a list of video clips opens. Select avideo clip you want to share and Options > Sendinvitation.2 Select the SIP address of the recipient to which youwant to send the invitation from the contacts list.If the SIP address of the recipient is not available, entera SIP address.3 Sharing begins automatically when the recipientaccepts the invitation.4 Select Pause to pause the sharing session. SelectContinue to resume sharing. If sharing a video clip, youcan rewind and fast forward the clip.R1112_en.book Page 25 Monday, February 13, 2006 4:20 PM
