Nokia NSM–3 Service Manual
Also see for NSM-3: Technical documentationTuning InstructionsTechnical documentationDisassembly & troubleshooting instructions
                                                                                                                                                                                                                                                                                                                                                      | |
Contents
|
NSM–3/3DService Software InstructionsPAMS Technical DocumentationPage 33Issue 4 02/2002 Nokia Mobile Phones Ltd.Tx Power... commandActivation Status Bar TextAlt, T, X Open TX Power Tuning dialog boxStarts TX power tuning.When the user has PKD–1 dongle in place tuning is started automaticallywith EEPROM values.Tuning values are loaded from program’s internal memory.The next automatic selections are made when this tuning function is acti-vated:the BASE power level is selectedOperation mode = TX pulsedThe TX Power Tuning dialog will be activated automatically after valueselection.NOTE: Make sure you are working with GSM900 band. First tune powerlevels 5, 15 and 19. Then Calculate the other levels and save the values.After this switch to PCN band and do the tuning to levels 0, 11 and 15.Then Calculate the other levels and save the values.GSM900 TX Power Tuning dialog:GSM1800 TX Power Tuning dialog: |
Related manuals for Nokia NSM-3
manualsdatabase
Your AI-powered manual search engine