Nokia NSM–3 Service Manual

Also see for NSM-3: Technical documentation Tuning Instructions Technical documentation Disassembly & troubleshooting instructions

NSM–3/3DService Software InstructionsPAMS Technical DocumentationPage 7Issue 4 02/2002 Nokia Mobile Phones Ltd.InstallationMechanical ConnectionsCaution: Make sure that you have switched off the PC and the printerbefore making connections.Caution: Do not connect the PKD–1 key to the serial port. You maydamage your PKD–1 !The software controls the phone via a separate adapter connected to theserial port of the PC, and to the telephone’s M2BUS (DAU–9S).Attach the dongle PKD–1 to the parallel port 1 (25–pin female D–connec-tor) of the PC. When connecting PKD–1 to the parallel port, be sure thatyou insert the computer side of the PKD–1 to the PC (male side). If youuse a printer on parallel port 1, install the PKD–1 between the PC andyour printer cable.The PKD–1 should not affect devices working with it. If some errors occur(errors in printing are possible) please try printing without the PKD–1. Ifprinting is OK without the PKD–1 please contact your dealer. We will offeryou a new PKD–1 in exchange for your old one.