Nokia NSM–3 Service Manual

Also see for NSM-3: Technical documentation Tuning Instructions Technical documentation Disassembly & troubleshooting instructions

NSM–3/3DService Software Instructions PAMS Technical DocumentationPage 74 Issue 4 02/2002 Nokia Mobile Phones Ltd.Displays path of PPM package file to be flashed.… button:Opens Open File dialog, with which the user can select a PPMpackage file to be flashed to ME. If the user selects OK button,the name of selected file is copied to PPM Image edit field.Usually you should use Market Area list box to select PPM file.Version in File edit field (read only):MCU SW version string of the PPM package.Package Versions edit field (read only):Lists the file versions of PPM package.Flash button (ALT+F):Starts flashing selected files to phone. Before flashing the SWasks, if the user wants to save all user settings to file (and loadthem after flashing). If reading user settings to ME or writingthem to ME failed, Restore Default User Settings dialog isopened and the user can restore default settings to phone.NOTE: If settings are saved but flashing fails or for some otherreason setting are not loaded back to phone, the saved set-tings can be loaded phone later. When settings are saved theyare also copied to files which names are generated from phonePSN. If settings are not loaded back to phone after flashingthose files are left and found by application when phone isflashed next time. After successful loading to phone files areremoved.Close button (ESC):Closes the dialog box anddoes not start flashing.Erasure Options group:Erase Defined Area check box:If it is checked, prommer erases from phone EEPROM areadefined with Low limit and High limit fields. If it is not checkedonly new blocks are erased from phone EEPROM. If values infields are not valid, then check box is disabled. Checkbox stateis read from flash pack ini–file, from entry EraseDefinedArea.Low limit edit box (read only):Hexadecimal value defining low erase limit, value should beplain hexadecimal without any prefix. Field value is read fromflash pack ini–file, from entry LowEraseLimit.High limit edit box (read only):Hexadecimal value defining high erase limit, value should beplain hexadecimal without any prefix. Field value is read fromflash pack ini–file, from entry HighEraseLimit.Force Download check box (ALT+D):