Nokia NSM–3 Service Manual

Also see for NSM-3: Technical documentation Tuning Instructions Technical documentation Disassembly & troubleshooting instructions

NSM–3/3DService Software Instructions PAMS Technical DocumentationPage 8 Issue 4 02/2002 Nokia Mobile Phones Ltd.Installing the Service Software on PC Hard DiskThe program is delivered on a diskette and is copy protected with adongle PKD–1. It must be present in parallel port when using Servicesoftware.The program must be installed on the hard disk before use.Keep the original diskette safe to enable upgrading of the program !First time installation of WinTesla:Do the following to make a complete WinTesla installation with support forNSM–3 (3D):Insert the WinTesla software diskette into the floppy drive on your com-puter (i.e. Drive A:)For Windows 3.1 and 3.11:Start Windows, typewin Open the File manager, open Main window and start File manager.Select the floppy drive and:Start installation, double–click thewt_inst.exe file.Follow the instructions on the screen. Write down the directory whereWinTesla is installed on your hard disk.When installation is completed remove the WinTesla software disk fromyour floppy drive.Insert the Dongle driver diskette into your floppy drive.Select the floppy drive and:Start installation, double–click thedk2wn16.exe file.Follow the instructions on the screen.When installation is completed remove the dongle driver software diskfrom your floppy drive.Continue with the support modules installation.For Windows 95 and NT:Open Microsoft Explorer, SelectStart –Programs – ExplorerSelect the floppy drive and:Start installation, double–click thewt_inst.exe file.Follow the instructions on the screen. Write down the directory whereWinTesla is installed on your hard disk.When installation is completed remove the WinTesla software disk fromyour floppy drive.Insert the Dongle driver diskette into your floppy drive.Select the floppy drive and: