AG 3100System Administration 219System MenuAdding an ARP Table Entry {ARP Add}ARP (Address Resolution Protocol) is used to dynamically bind a high level IP address to alow level physical hardware (MAC) address. ARP is limited to a single physical network thatsupports hardware broadcasting. This procedure shows you how to add an ARP table entry.1. From the Web Management Interface, click on System, then ARP Add. The Add ARPTable Entries screen appears:1. Enter the IP Address of the entry you want to add.2. Enter the MAC Address.3. Define whether this entry is Regular or Static.4. Click on the Add button to add your entry, or click on the Reset button if you want toreset all the values to their previous state.
