AG 3100Installing the AG 3100 37The Management Interfaces (CLI and Web)The AG 3100 supports various methods for managing the system remotely. These include, anembedded graphical Web Management Interface (WMI), an SNMP client, or Telnet. However,until the unit is installed and running, system management is performed from the AG 3100’sembedded CLI via a direct serial cable connection. The CLI can also be accessed remotely.Until the unit is installed on the customer’s network and a remote connection is established, theCLI is the administrator’s window to the system. This is where you establish all the AG 3100start-up configuration parameters, depending on the customer’s network architecture.The AG 3100 Menu is your starting point. From here, you access all the system administrationitems from the 5 (five) primary menus available:z Configurationz Network Infoz Port-locationz Subscribersz SystemAlthough the basic functional elements are the same, the CLI and the WMI havesome minor content and organizational differences. For example, in the WMI the“subscribers” menu is divided into “Subscriber Administration” and“Subscriber Interface.” See also, Menu Organization (Web ManagementInterface) on page 38.
