AG 310046 Installing the AG 3100Enabling the Logging Options (recommended)System logging creates log files and error messages generated at the system level. AAAlogging creates activity log files for the AAA (Authentication, Authorization, and Accounting)functions. You can enable either of these options.When system logging is enabled, the standard SYSLOG protocol (UDP) is used to send allmessage logs generated by the AG 3100 to the specified server.1. Enter log (logging) at the Configuration menu.The system displays the current logging status (enabled or disabled).2. Enable or disable the system and/or AAA logging options, as required. If you enable eitheroption, go to Step 3, otherwise logging is disabled and you can terminate this procedure.3. Assign a valid ID number (0-7) to each server.4. Enter the IP addresses to identify the location of the system and AAA SYSLOG servers onthe network (the default for both is 0.0.0.0).When logging is enabled, log files and error messages are sent to these servers for futureretrieval. To see sample reports, go to Sample SYSLOG Report on page 267 and SampleAAA Log on page 265.Although the AAA and billing logs can go to the same server, we recommend thatthey have their own unique server ID number assigned (between 0 and 7). Whenmanaging multiple properties, the properties are identified in the log files by theirIP addresses.
