A CCESS GATEWAYInstalling the Access Gateway 47Server-IP Server-Netmask Start-IP End-IP Lease Type IPUp208.11.0.4 255.255.0.0 208.11.0.5 208.11.0.7 20 PRIV NO10.0.0.4 255.255.255.0 10.0.0.5 10.0.0.250 30 PRIV NO ** Default IP PoolDHCP IP Pools Configuration:0 - Show IP Pools1 - Add a new IP Pool2 - Modify an IP Pool3 - Remove an IP Pool4 - Exit this menuSelect the DHCP Pool configuration mode [0]:DHCP Options from RFC 2132You can configure DHCP options as defined in RFC 2132. The configured options are sent tosubscribers who obtain their network configuration from the NSE via DHCP.This capability only applies to the NSE’s DHCP Server function. There is no change to theNSE’s operation as a DHCP client.The options are configurable on a per-pool basis. Different sets of options can be configuredfor different pools.A given DHCP option consists of an option code and a value. RFC 2132 details the variousavailable options, and the data type for each. The NSE will validate the data entered to ensurethat it is type-correct for the option code in question. If it is incorrect, the option is notaccepted.Numerical integer values can be entered in decimal format, or hex format using a “0x” prefix.The following DHCP option codes are supported:After setting up your DHCP options, the system must be rebooted for yourchanges to take effect.Option Description Option CodeSingle IP address 16, 28, 32List of one or more IP addresses 3-5, 7-11, 41-42, 44-45, 48-49, 65, 69-76List of zero or more IP addresses 68List of one or more pairs of IP addresses (oraddress/mask pairs)21, 33
