A CCESS GATEWAYSystem Administration 55Managed objects are arranged into a virtual information database, called a ManagementInformation Base (MIB). SNMP enables managers and agents to communicate with each otherfor the purpose of accessing these MIBs and retrieving data. See also, “Installing the NomadixPrivate MIB” on page 52.The following example shows a (partial) SNMP screen response.Using a Telnet ClientThere are many Telnet clients that you can use to connect with the Access Gateway. UsingTelnet provides a simple terminal emulation that allows you to see and interact with the AccessGateway’s Command Line Interface (as if you were connected via the serial interface). As withany remote connection, the network interface IP address for the Access Gateway must beestablished (you did this during the installation process).Logging InTo access the Access Gateway’s Web Management Interface, use the Manager or Operatorlogin user name and password you defined during the installation process (refer to AssigningLogin User Names and Passwords).About Your Product LicenseSome features included in this section will not be available to you unless you have purchasedthe appropriate product license from Nomadix. In this case, the following statement willUser names and passwords are case-sensitive.
