Norac UC5 Operator's Manual
Also see for UC5 Topcon X30: Installation manualInstallation manualInstallation manualInstallation manualInstallation manual
                                                          | |
Contents
| 
3410 Diagnostics MenuDiagnostics Menu provides useful information of the UC5™ Spray Height Control System andtest functions. Navigate to the UC5™ Settings Menu (Section 8.1) and choose the Diagnosticsbutton as shown in Figure 24 to access Diagnostics Menu.In this menu selected sprayer type, software versions, actual sensor height readings, hydraulicsettings, geometry settings, and the valve movement test functions can be accessed. Refer toSection 5 for the description of the icons.Figure 24: Diagnostics Button Figure 25: Diagnostics MenuSprayer TypeBy selecting Sprayer Type button, the selectedsprayer Type (Make and Model) will bedisplayed.VersionsIn this screen the firmware and hardwareversions of UC5™ Controller (CM) and otherUC5™ modules such as height sensors (HS),roll sensors (AS), Valve module (VM), or Inputmodule (IM). Non-NORAC modules may notshow the correct versions.To check them select a desired module nameand its serial number from the list.SensorsThe Sensors screen displays raw height sensorreadings of connected sensors. The example onthe right shows a five-sensor system. |
Related manuals for Norac UC5 Topcon X30
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine