218 Main office configuration3.01" (page 218)) or overlays (see Procedure 12 "Configuring MG1000B IP Phones at the main office using LD 11" (page 218)).—End—MG 1000B IP Phone configurationAfter the Branch Office zones and passwords are provisioned, provision theMG 1000B IP Phones at the main office. These can be provisioned usingTM 3.01 (see "MG 1000B IP Phone configuration using TM 3.01" (page218)) or LD 11 (see Procedure 12 "Configuring MG 1000B IP Phones at themain office using LD 11" (page 218)).There is no automatic data synchronization between the main officeCall Server and MG 1000B Call Server. The technician must provisionthe telephone on all pertinent Call Servers or MGCs. See Using theImport/Export facility in TM 3.01 and Copying and Pasting IP Phone Datausing TM 3.01 for details on easily transferring the data from the main officeto the Branch Office.MG 1000B IP Phone configuration using TM 3.01At the main office, TM 3.01 can be used to configure MG 1000B IP Phones.Use Telephone Pages to configure the telephones to include the following:• Terminal Type• TN• Customer Number• Branch Office Zone• Prime DN corresponding to the BUIDRefer to the Telephony Manager 3.0: System Administration NTP for details.MG 1000B IP Phone configuration using LD 11Use Procedure 12 "Configuring MG 1000B IP Phones at the main officeusing LD 11" (page 218) at the main office to configure MG 1000B IPPhones.Procedure 12Configuring MG 1000B IP Phones at the main office using LD 11Step Action1 Configure the Branch Office zones and dialing plan. See Procedure9 "Configuring ESN and MG 1000B zones" (page 210).Nortel Communication Server 1000Branch Office Installation and CommissioningNN43001-314 01.02 StandardRelease 5.0 20 June 2007Copyright © 2007, Nortel Networks.
