Nortel 1000 Con?guration guide Manual

Also see for 1000 Con?guration guide: Brochure Reference User manual Overview User guide

Contents

Nortel 1000 Con?guration guide Manual Manual pdf 101 page image

MCS 5100 tools 101Command DescriptioncdsCallTraceSetAll Enables CDS call trace for all calls.All messages to or from the Call Server and to or from theSignaling Server that relate to a Converged Desktop callare traced.cdsCallTraceOff Turns off CDS call trace for all calls.cdsCallTraceSetDN "callingNum","calledNum"Sets CDS call trace for a particular calling party or calledparty DN.Where:• "callingNum" is the calling party DN. If set to 0, it tracesall calls to a non-zero "calledNum".• "calledNum" is the called party DN. If set to 0, it tracesall calls from a non-zero "callingNum".MCS 5100 toolsTranslation Verification toolUse the MCS 5100 Translation Verification tool to check the configuration ofCSD telephony route. Use Procedure 10 "Using the MCS 5100 TranslationVerification tool" (page 101) to access the Translation Verification tool.Procedure 10Using the MCS 5100 Translation Verification toolStep Action1 Enter the IP address of the MCS Provisioning Client in a webbrowser.The Provisioning Client Login web page opens, as shown inFigure 20 "Provisioning Client Login" (page 70).2 Enter your Username and Password.The Provisioning Client web page opens, as shown in Figure 21"Provisioning Client" (page 70).3 Select Provisioning > Domains > mydomain.com > TelephonyRoutes > Translation Tool in the MCS Provisioning Client navigator.The Translation Verification Tool web page opens, as shown inFigure 44 "Provisioning Client: Translation Verification Tool" (page102).Nortel Communication Server 1000Communication Server 1000 to MCS 5100 Converged Desktop Type 2 Configuration GuideNN43001-321 01.05 StandardRelease 5.0 15 February 2008Copyright © 2005-2008, Nortel Networks.