Replacing the NTDW65 Voice Gateway Media Card 123Replacing the NTDW65 Voice Gateway Media CardProcedure 18Replacing the NTDW65 Voice Gateway Media CardStep Action1 In Element Manager, select System > Maintenance from thenavigator.The Maintenance Web page appears. You can select an overlay ora function to perform maintenance. The default is overlay.2 Select Select by Functionality.A list of available diagnostics appears.3 Select Network & Peripheral Equipment.The Network & Peripheral Diagnostics page appears.4 Select DISC – Disable card from the Card Commands list.5 Enter the card number in the corresponding Command Parametertext box.6 Click Submit to the right of the text box.The output from this command is shown in the text box in the lowerhalf of the web page.7 Remove the card:a. Label and remove all cables.b. Unhook the locking devices.8 Install the replacement card:a. Pull the top and bottom locking devices away from the cardfaceplate.b. Insert the Voice Gateway Media Card into the card guides andgently push it until it makes contact with the backplane connector.c. Hook the locking devices.The Voice Gateway Media Card boots automatically. If the cardis a Follower, it retrieves the node configuration files from the IPtelephony node Leader. If the card is a Leader, you must configureit. See IP Line Fundamentals (NN43100-500) for the configurationprocedure.9 Observe the Voice Gateway Media Card faceplate display.Nortel Communication Server 1000Communication Server 1000E MaintenanceNN43041-700 01.02 StandardRelease 5.0 20 June 2007Copyright © 2007, Nortel Networks.
