160 Element Manager• workfile path and file nameWith this generic approach, you can access the software server (primarySSC) through its ELAN or TLAN interface, depending on the IP addressspecified. The path to a workfile is not fixed.The trigger function returns as soon as an element is notified. Pacingof the downloads (to minimize network and server resource impact) isaccomplished by notifying the elements serially: the next element is notnotified until the current element has completed its workfile download.The element retrieves and processes the workfile when triggered.Processing can include the following:• unpacking the workfile• making a backup copy of the original software• programming flash memory• copying disk filesThe technician must refresh the software management web pages to viewthe element status, including the software version. You must reboot selectedelements to use the new software when the upgrade process is complete.LD 36 analog trunk card statusThe STAT command in LD 36 provides status for all analog trunk cardswithin the system. The card number prints before the list of units.Sample output of LD 36 with the STAT command:CARD 1UNIT 00 = DSBL (TRK)(TIE LDR IMM/IMM)UNIT 01 = UNEQUNIT 02 = DSBL (TRK)(TIE LDR IMM/IMM)UNIT 03 = UNEQUNIT 04 = UNEQUNIT 05 = DSBL (TRK)(DID LDR IMM/IMM)UNIT 06 = UNEQUNIT 07 = DSBL (TRK)(TIE LDR IMM/IMM)Nortel Communication Server 1000Communication Server 1000E MaintenanceNN43041-700 01.02 StandardRelease 5.0 20 June 2007Copyright © 2007, Nortel Networks.
