52 Hardware maintenance toolsInitialize buttonSimilar to the Init button on the CS 1000E Core Call Server, the manualinitialize (Man Int) button on the SSC card starts the Initialize program.The Initialize program can clear some equipment faults. It then rebuildscall-dependent data, and generates system messages indicating the statusof the system. This process is called an initialization.CAUTIONSERVICE INTERRUPTIONCall processing is briefly interrupted during an initialization.NTDK83 and NTDK99 IP daughterboard LEDsThe NTDK83 and NTDK99 IP daughterboard network interfaces each havethree LEDs for each IP network interface they contain. The LEDs providethe status of the Layer2 network link to the IP daughterboards. Figure 9"NTDK83 and NTDK99 card circuit board LEDs" (page 52) and Table 13"NTDK83 and NTDK99 daughterboards LEDs" (page 52) provide furtherdescriptions of these LEDs.Figure 9NTDK83 and NTDK99 card circuit board LEDsTable 13NTDK83 and NTDK99 daughterboards LEDsLED State DefinitionRed The information/data is being received.ReceiveOff No information/data is being received.Yellow Information/data is being transmitted.TransmitOff No information/data is being transmitted.Nortel Communication Server 1000Communication Server 1000E MaintenanceNN43041-700 01.02 StandardRelease 5.0 20 June 2007Copyright © 2007, Nortel Networks.
