147Using the Business Policy Switch 2000 Version 1.2Chapter 3Using the console interfaceThis chapter describes how to configure and manage the Business Policy Switchusing the menu-driven console interface (CI).This chapter covers the following topics:• “Compatibility with BayStack 450 switches,” next• “Accessing the CI menus and screens” on page 148• “Using the CI menus and screens” on page 149• “Main Menu” on page 151Compatibility with BayStack 450 switchesThe BPS 2000 software version 1.2 is compatible with BayStack 450 softwareversion 4.1.When you are using a local console to access the BPS 2000 software version 1.2features with a Hybrid, or mixed, stack (BPS 2000 and BayStack 450 and 410switches in the same stack), you must plug your local console into a BPS 2000unit.To find out which version of the BPS 2000 software is running, use the consoleinterface (CI) menus or the Web-based management system:• CI menus—From the main menu of the console, choose SystemsCharacteristics menu. The software currently running is displayed insysDescr.• Web-based management system—Open the System Information page, whichis under Administration on the main menu. The software currently running isdisplayed in the sysDescription field.
