54Using the Business Policy Switch 2000 Version 1.2Use a text editor to edit the ASCII configuration; the command format is the sameas that of the CLI.You can initiate the ASCII configuration file download using CLI commands onlywhile connected to the base unit, and the ASCII configuration script will executeto completion. When you initiate downloading the ASCII configuration file fromthe console interface, the console does not display output. For this reason, it isimportant that you review the commands in the file to ensure accuracy andcompleteness.For information on setting the parameters for the ASCII configuration file feature,refer to Chapter 3.Sample ASCII configuration fileThis section shows a sample ASCII configuration file. This file is an exampleonly and shows a basic configuration for a standalone BPS 2000 that includesMulti-Link Trunking, VLANs, port speed and duplex, and SNMP configurations.! -------------------------------------------------------! example script to configure different features from CLI! -------------------------------------------------------!enableconfigure terminal!!! -------------------------------------------------------! add several MLTs and enable! -------------------------------------------------------mlt 3 name lag3 enable member 13-14mlt 4 name lag4 enable member 15-16mlt 5 name lag5 enable member 17-18!!! -------------------------------------------------------! add vlans and ports
