Page 116 of 430 Nortel IP Phone 2004553-3001-368 Standard 7.00 August 200511 Enter the following information provided by your system administrator:12 The IP Phone 2004 registers with the TPS and, if needed, begins thefirmware download. This takes several minutes. When registration iscomplete, the IP Phone 2004 resets.Note: The Enhanced UNIStim Firmware Download feature for IP Phonesprovides an improved method of delivering new firmware to IP Phones.For further information on Enhanced UNIStim Firmware Download, referto IP Line: Description, Installation, and Operation (553-3001-365).The current system date and time appear on the top line of the displaywhen the configuration is complete. Self-labeling keys also appear.13 Check for dial tone and the correct DN above the display.14 Secure the IP Phone footstand to the base of the IP Phone. Use the angleadjustment grip on the top back of the IP Phone to adjust the position.15 (Optional) Customize the feature keys as required. For more information,see IP Phone 2004 User Guide.End of ProcedureProcedure 19Installing an IP Phone 2004 for the first timeusing DHCP1 Configure a virtual loop on the system using LD 97.For more information, see Software Input/Output: Administration(553-3001-311).2 Configure the IP Phone 2004 on the system using LD 11.For more information, see Software Input/Output: Administration(553-3001-311).Screen prompt DescriptionPassword IP Phone Installer PasswordYou are not prompted to enter the IP PhoneInstaller Password if it has not been configuredin your system.Node The node ID.TN The TN or VTN.
