Page 46 of 430 Nortel IP Phone 2001553-3001-368 Standard 7.00 August 200511 The IP Phone 2001 can support primary (S1) and secondary (S2) connectserver. If you require IP Phones to register on multiple nodes, refer to“Enhanced Redundancy for IP Line Nodes” in IP Line: Description,Installation, and Operation (553-3001-365).The IP Phone 2001 searches for the connect server. When theconnection is complete, proceed with step 12.12 Enter the following information provided by your system administrator:The IP Phone 2001 registers with the Terminal Proxy Server (TPS) and,if needed, begins the firmware download. This takes several minutes.When the download is complete, the IP Phone 2001 resets.Note: The Enhanced UNIStim Firmware Download feature for IP Phonesprovides an improved method of delivering new firmware to IP Phones.For further information on Enhanced UNIStim Firmware Download, referto IP Line: Description, Installation, and Operation (553-3001-365).The current system date and time appear on the top line of the displaywhen the configuration is complete. Self-labeling keys also appear.13 Check for dial tone and the correct DN above the display.14 Secure the IP Phone footstand to the base of the IP Phone. Use the angleadjustment grip on the top back of the IP Phone to adjust the position.15 (Optional) Customize the feature keys as required. For more information,see IP Phone 2001 User Guide.End of ProcedureScreen prompt DescriptionPassword IP Phone Installer PasswordYou are not prompted to enter the IP PhoneInstaller Password if it has not been configuredin your system.Node The node ID.TN The TN or VTN.
