194 Switch administration tasksno ip name-server no ip name-server []no ip name-server []Note: To remove all three server addresses, you must enter thecommand three times, each with a different server address."no ip name-server parameters" (page 194) outlines the parameters forthis command.no ip name-server parametersParameter Description The IP address of the domain name server toremove. Optional. The IP address of a domain nameserver to remove from the list of servers usedby the switch. Optional. The IP address of a domain nameserver to remove from the list of servers usedby the switch.Run this command in Global Configuration command mode.General Switch Administration using the Web-based ManagementInterface This section contains the following topics:• "Viewing stack information" (page 194)• "Viewing summary switch information" (page 196)• "Changing stack numbering" (page 197)• "Identifying unit numbers" (page 199)• "Configuring BootP, IP, and gateway settings" (page 200)• "Modifying system settings" (page 203)• "Managing remote access by IP address" (page 205)• Configuring the Real-Time ClockViewing stack informationNote: The Embedded Web Server automatically detects the operationalmode of your system. If the system is in stand-alone mode, the StackInformation page option is not listed in the menu.Nortel Ethernet Routing Switch 4500 SeriesOverview — System ConfigurationNN47205-500 02.01 Standard5.0 23 February 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
