Setting user access limitations 753 radius-server password fallbackThis command has no parameters and enables the passwordfallback RADIUS option if it you did not set the option when youinitially configured the RADIUS server.—End—Setting user access limitations using the Web-based ManagementInterfaceThe administrator can use the Web-based Management Interface to limituser access by creating and maintaining passwords for Web, Telnet, andConsole access. The following sections describe how to perform theprocedures:• "Setting the Web password" (page 75)• "Setting the Telnet password" (page 77)• "Setting the Console password" (page 78)• "Configuring RADIUS authentication" (page 80)Setting the Web passwordTo require password authentication when the user logs on to the switchthrough the Web-based Management Interface, you must edit the Webpassword. To do this, select Administration > Security > Web from themain menu and perform the following procedure.Step Action1 From the Web Switch Password Type list, select the password type.Three options are available in the Web Switch Password Type list:• NoneUsers who access the switch through the Web-basedManagement Interface require no password.CAUTIONUsing None means that any user who knows the IPaddress of the switch and the appropriate networkaccess can change the switch configuration.• Local PasswordThe user must enter a password that determines their individualaccess rights. These passwords are configured in steps 2 and 3Nortel Ethernet Routing Switch 4500 SeriesOverview — System ConfigurationNN47205-500 02.01 Standard5.0 23 February 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
