42 4500 Series user interfacesthe IP address of the switch from the list. Be aware that using Device> Open Last by SNMPv3 enables any switch user to access SNMPv3devices.Device Manager interface componentsThe Java Device Manager application comprises several user interfacecomponents. This section highlights those components and their use inthe application.This section contains the following topics:• "Menu bar" (page 42)• "Toolbar" (page 43)• "Device view" (page 44)• LEDs and ports• "Shortcut menus" (page 47)• "Status bar" (page 48)• "Using the buttons in Device Manager screens" (page 48)• "Editing objects" (page 49)• "Telnet session to a switch" (page 55)• "Opening an SSH connection to the switch" (page 55)• "Trap log" (page 55)• "Accessing the Web-based Management Interface" (page 56)• "Device Manager Online Help" (page 56)Menu barUse the menu bar to set up and operate Device Manager.The following table "Menu bar commands" (page 42) describes the Menubar commands.Menu bar commandsCommand DescriptionDevice Open a device, refresh the device view, rediscover adevice, and set the polling and SNMP properties. Use thismenu to open and view the Trap Log, SysLog, and Log.Establish a Telnet or SSH connection to the device thatis currently open.Nortel Ethernet Routing Switch 4500 SeriesOverview — System ConfigurationNN47205-500 02.01 Standard5.0 23 February 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
