116 Configuring static link aggregationField DescriptionOutMulticast The total number of packets that higher-level protocolsrequested be transmitted, and that were addressed to amulticast address at this MLT, including those that werediscarded or not sent. For a MAC layer protocol, this numberincludes both Group and Functional addresses.InBroadcastPkt The number of packets delivered to this MLT that wereaddressed to a broadcast address at this sublayer.OutBroadcast The total number of packets that higher-level protocolsrequested be transmitted, and that were addressed to abroadcast address at this MLT, including those that werediscarded or not sent.Viewing link aggregation Ethernet error statisticsTo view link aggregation Ethernet error statistics:Step Action1 Select VLAN >MLT from the Device Manager menu bar.The MLT dialog box appears and displays active link aggregationgroups. See "MLT dialog box - MultiLink Trunks tab" (page 110).2 Click in the row of a link aggregation group to select it.The Graph button is activated.3 Click the Graph button.The Statistics, MLT dialog box appears, with the interface tabselected.4 Click the Ethernet Errors tab.The Ethernet Errors tab appears, and displays the statistics. See"Statistics, MLT dialog box - Ethernet Errors tab" (page 117).Nortel Ethernet Routing Switch 8300Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device ManagerNN46200-510 03.01 Standard4.0 27 August 2007Copyright © 2005-2007, Nortel Networks.
