96 Configuring Spanning Tree GroupThe field becomes editable.4 Enter a new value in the field, or select a new setting from thedrop-down list.5 Click Apply.The changes are applied to the STG.—End—Adding ports to an STGTo add ports to an STG:Step Action1 Select VLAN > STG from the Device Manager menu bar.The STG dialog box appears with the Globals tab selected. See"STG dialog box - Globals tab" (page 92).2 Click the Configuration tab.The Configuration tab appears. See "STG dialog box - Configurationtab" (page 93).3 Double-click the PortMembers field for the STG.The STGPortMembers dialog box appears, indicating the portmembers assigned to this STG. See "StgPortMembers dialog box"(page 94).4 Click the ports you want to add to the STG.5 Click OK.The StgPortMembers dialog box closes, and the ports are added tothe PortMembers field in the Configuration tab.6 Click Apply.The ports are added to the STG.—End—Viewing STG statusWith the Status tab, you can view the status of the spanning tree for eachSTG associated with the network.To view STG status:Nortel Ethernet Routing Switch 8300Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device ManagerNN46200-510 03.01 Standard4.0 27 August 2007Copyright © 2005-2007, Nortel Networks.
