124 Configuring static link aggregationSingle Port SMLT tab fields describes the fields on the Single Port SMLT tab.Deleting a single port SMLTTo delete a single port SMLT:Step Action1 Select the port from the Device Manager main window.2 Select Edit > Port from the menu bar.The Port dialog box appears with the Interface tab selected.3 Select the SMLT tab.The SMLT tab displays the single port SMLT ID.4 Select the single port SMLT by selecting any field in the row.5 Click Delete.6 Click Close.The single port SMLT configured for the port is deleted.—End—Configuring an IST MLTTo configure an IST MLT, perform the following procedure (this procedureassumes you already configured at least one MLT):Step Action1 Select VLAN > MLT from the Device Manager menu bar.The MLT dialog box appears with the MultiLink Trunks tab selected.2 Double-click the PortMembers field in the row containing thedesired MLT.PortMembers dialog box appears.3 Select the ports to include in the MLT.4 Click OK to close the PortMembers dialog box.The selected port members are added to the PortMembers field ofthe MLT dialog box.5 Double-click the MltType field.6 Select istMLT from the list.Nortel Ethernet Routing Switch 8300Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device ManagerNN46200-510 03.01 Standard4.0 27 August 2007Copyright © 2005-2007, Nortel Networks.
