144 Chapter 15 Using the Startup Profile to configure parametersN0027152 01N0027152 01Refer to the following sections for information on setting the initial parameters on the BCM50system:• “Startup Profile requirements”• “Configuring basic parameters” on page 145Startup Profile requirementsTo use the Startup Profile template, you need the following:• a computer with a USB port• Microsoft Excel 2000 or greater• the Nortel BCM50 Startup Profile template (Microsoft Excel template)If you do not have the Startup Profile template on your computer, you can get a copy from thethe Nortel support website (www.nortel.com/cs), or the Administrator Applications page onthe main unit. Refer to “To download the Startup Profile template” on page 145 for details ongetting the Startup Profile template from the main unit• a portable USB storage device compatible with USB 1.1 (formatted for FAT32)Note: The USB storage device must be formatted for the FAT32 file system. Ifnecessary, reformat the USB storage device by plugging it into the USB port ofyour computer, right-clicking the USB device icon, and selecting FAT32reformatting. This destroys any data you had on the USB.Note: The Startup Profile works only on a BCM50 system that has no keycodes loaded.After the keycodes are loaded, the Startup Profile does not work. This condition preventsunintentional overwriting of the parameters of a configured system.Note: The Startup Profile template uses macros to perform certain functions. Youmust set your Excel macro security level to medium or low to enable the macros:• From the Tools menu, select Macros, then select Security..., and selectMedium or Low.• Exit from Excel.• Open the Startup Profile template (in Excel).• Enable macros if prompted.
