Chapter 15 Using the Startup Profile to configure parameters 145BCM50 Installation and Maintenance GuideTo download the Startup Profile template1 Connect one end of the Ethernet cable to the OAM port on the main unit, and connect the otherend to the Ethernet port on your computer.The DHCP-enabled computer is assigned IP address 10.10.11.2. (255.255.255.252).2 Open a web browser and enter the IP address 10.10.11.1 (BCM50 OAM port IP address).The Enter Network Password dialog box opens.3 Enter the following username and password:Username: nnadminPassword: PlsChgMe!4 Click Ok.The Welcome to BCM50 web page opens.5 From the Welcome to BCM50 web page, click Administrator Applications.The Administrator Applications page opens.6 From the Administrator Applications page, click Startup Profile Template.The Startup Profile Template panel opens.7 Click Download Startup Profile Template on the right side of the screen.Configuring basic parametersTo customize a Startup Profile for your system1 On a computer that has a USB port and Microsoft Excel, open the Startup Profile template(Microsoft Excel template).2 Enter your BCM50 system ID in the appropriate System ID field in the Startup Profiletemplate.The system ID is on the box of the main unit or on the main unit itself. If you enter the wrongsystem ID, the Startup Profile will not work with your system.3 Press the large button at the top of the Startup Profile template to save a version of the StartupProfile (.sps file) and a version of the Startup Profile editor (Excel spreadsheet) on yourcomputer.Note: You cannot copy and paste data between cells in the Startup Profile. If youattempt this, the data validation within the spreadsheet becomes corrupt.If corruption occurs, download another copy of the Startup Profile template fromthe BCM50.
