Appendix K System region attributes 235BCM50 Installation and Maintenance GuideSystem defaultsTable 58 compares the system defaults for the North American, Global and UK regions. Inaddition, the following functionality applies:• Regions for Denmark, Holland and Sweden are the same as the Global region except for thedefault to local languages and local tones and cadences.• The Region for the Caribbean is the same as the North American region except that it supportsthe M7000 telephone.• The Region for CALA is the same as the Caribbean region, except NI ISDN is replaced byETSI ISDN (u-law).Table 58 Region defaults (Sheet 1 of 2)Functionality Attribute North American Global United KingdomDirect Dial Access code 0 0 0DTMF parameters Tone duration 120 msec 120 msec 120 msecPause time 1.5 1.5 3.5Interdigit time 80 msec 80 msec 100 msecConference tone disabled disabled enabledPCM Companding Law mu-law a-law EBI a-law EBIOLI digits variable lengthdigits:minimum=DN length,maximum=10variable length toa maximum of 15digitsvariable length to amaximum of 15digitsDial Tone Detection enabled enabled enabledHunt Groups Default delay 4 ring cycles 4 ring cycles 4 ring cyclesQueue timeout 60 sec 60 sec 60 secIf busy busy tone busy tone busy toneMode broadcast broadcast sequentialTarget line if busy setting prime prime busy toneM7000 set disabled enabled enabledFax switch enabled enabled enabledService Schedule time Night start 23:00end 07:00start 23:00end 07:00start 23:00end 07:00Evening start 17:00end 23:00start 17:00end 23:00start 17:00end 23:00Lunch start 12:00end 13:00start 12:00end 13:00start 12:00end 13:00Service 4 start 00:00end 00:00start 00:00end 00:00start 00:00end 00:00Service 5 start 00:00end 00:00start 00:00end 00:00start 00:00end 00:00Service 6 start 00:00end 00:00start 00:00end 00:00start 00:00end 00:00Call Forward Delay Default disabled disabled disabled
