Chapter 9 Network Address Translation (NAT) 107BCM50e Integrated Router Configuration - AdvancedThe example situation looks like this:Figure 46 NAT example 31 In this case you must configure Address Mapping Set 1 from Menu 15.1 -Address Mapping Sets. Therefore, you must choose the Full Featureoption from the Network Address Translation field (in menu 4 or menu11.1.2) (see Figure 47).2 Enter 15 from the main menu.3 Enter 1 to configure the Address Mapping Sets.4 Enter 1 to begin configuring this new set. Enter a Set Name, choose the EditAction and then enter 1 for the Select Rule field. Press [ENTER] to confirm.5 Select Type as One-to-One (direct mapping for packets going both ways),and enter the local Start IP as 192.168.1.10 (the IP address of FTP Server 1),the global Start IP as 10.132.50.1 (our first IGA). (see Figure 48).6 Repeat the previous step for rules 2 to 4 as outlined above.7 When finished, menu 15.1.1 looks like as shown in Figure 49.BCM50e Integrated Router