180 Chapter 16 System Maintenance menus 8 to 10N0115789Figure 95 Menu 24.10 System Maintenance: Time and Date SettingTable 44 describes the fields in Figure 95.Menu 24.10 - System Maintenance - Time and Date SettingTime Protocol= NTP (RFC-1305)Time Server Address= a.ntp.alphazed.netCurrent Time: 01 : 07 : 41New Time (hh:mm:ss): N/A N/A N/ACurrent Date: 2000 - 01 - 01New Date (yyyy-mm-dd): N/A N/A N/ATime Zone= GMTDaylight Saving= NoStart Date (mm-nth-week-hr): Jan. - 1st - Sat. - 00End Date (mm-nth-week-hr): Jan. - 1st - Sat. - 00Press ENTER to Confirm or ESC to Cancel:Press Space Bar to Toggle.Table 44 Time and Date Setting FieldsField DescriptionTime Protocol Enter the time service protocol that your time server uses. Not alltime servers support all protocols, so check with your ISP or networkadministrator or use trial and error to find a protocol that works. Themain differences between the time protocols are the format.Daytime (RFC 867) format is the day/month/year/time zone of theserver.Time (RFC-868) format displays a 4-byte integer giving the totalnumber of seconds since 1970/1/1 at 0:0:0.The default, NTP (RFC-1305), is similar to Time (RFC-868).Select Manual to enter the new time and new date manually.Time ServerAddressEnter the IP address or domain name of your timeserver. Check withyour ISP or network administrator if you are unsure of thisinformation. The default is a.ntp.alphazed.net.Current Time This field displays an updated time only when you reenter this menu.New Time Enter the new time in hour, minute and second format. This field isavailable when you select Manual in the Time Protocol field.
