Chapter 17 Remote Management 185BCM50e Integrated Router Configuration - AdvancedRemote Management LimitationsRemote management over LAN or WAN does not work when:1 A filter in menu 3.1 (LAN) or in menu 11.1.4 (WAN) is applied to block aTelnet, FTP, or Web service.2 You disable that service in menu 24.11.3 The IP address in the Secured Client IP field (menu 24.11) does not matchthe client IP address. If it does not match, the Business Secure Routerdisconnects the session immediately.4 There is already another remote management session of the same type (web,FTP or Telnet) running. Only one remote management session of the sametype can run at one time.5 There is a web remote management session running with a Telnet session. ATelnet session is disconnected if you begin a web session; it does not begin ifa Web session is already running.6 There is a firewall rule that blocks remote management.Certificate Press [SPACE BAR] and then [ENTER] to select the certificate thatthe Business Secure Router uses to identify itself. The BusinessSecure Router is the SSL server and must always authenticate itselfto the SSL client (the computer that requests the HTTPS connectionwith the Business Secure Router).Authenticate ClientCertificatesSelect Yes by pressing [SPACE BAR], then [ENTER] to require theSSL client to authenticate itself to the Business Secure Router bysending the Business Secure Router a certificate. To do that, theSSL client must have a CA-signed certificate from a CA that hasbeen imported as a trusted CA on the Business Secure Router (seeAppendix C, “Importing certificates,” on page 207 for details).After you fill this menu, press [ENTER] at the message "Press ENTER to Confirm or ESCto Cancel" to save your configuration, or press [ESC] to cancel.Table 45 Menu 24.11 – Remote Management controlField Description
