158 Chapter 14 System information and diagnosisN0115789Figure 81 WAN & LAN DHCPTable 37 describes the diagnostic tests available in menu 24.4 for your BusinessSecure Router and associated connections.Table 37 System Maintenance menu diagnosticField DescriptionPing Host Enter 1 to ping any machine (with an IP address) on yourLAN or WAN. Enter its IP address in the Host IP Addressfield below.WAN DHCP Release Enter 2 to release your WAN DHCP settings.WAN DHCP Renewal Enter 3 to renew your WAN DHCP settings.Internet Setup Test This feature is only available for dial-up connections usingPPPoE or PPTP encapsulation. Enter 4 to test the Internetsetup. You can also test the Internet setup in Menu 4 -Internet Access. Refer to Chapter 5, “Internet access,” onpage 61 for more details.Reboot System Enter 11 to reboot the Business Secure Router.Host IP Address= If you entered 1 in Ping Host, enter the IP address of thecomputer you want to ping in this field.Enter the number of the selection you want to perform orpress [ESC] to cancel.BCM50e Integrated Router
