60 Chapter 5 Monitoring multimedia hardware3 Do one of the following:If you want to stop or start Thenall of the channels associated witha DSPselect the Select All check box tothe left of the DSP that you wantto stop or start.Repeat this step for each DSP.only one or several channels thatare associated with a DSPselect the check box for eachchannel that you want to stop orstart.4 Click Courtesy Stop or Start, as required.Result: If you clicked Courtesy Stop or Start, you are asked toconfirm the Courtesy Stop or Start. Click OK.The selected channels change to off-duty or on-duty status,according to the action you chose.Note: If the buttons are not available, wait a few seconds forthe screen to refresh.—End—Working with the Channel MonitorThe Channel Monitor shows the status of call channels. The call channelsare the connections between the server and the switch that carry the callsignals to CallPilot.To view or work with call channel statesStep Action1 Log on to CallPilot Manager.2 Click Maintenance → Channel Monitor.Result: The Channel Monitor screen appears, showing the DS30X(also known as DS0) channels associated with each DS30X link.Nortel CallPilot600r Server Maintenance and DiagnosticsNN44200-703 01.04 Standard5.0 25 April 2007Copyright © 2007, Nortel Networks.
