2-6 Installation of Network Wide Backup & RestoreIntegrated Network Management 450-3101-031 Rel 1.0 Standard June 1999NTP Update Issue 1 July 1999Procedure 2-3Saving the Network Wide Backup & Restoreconfiguration dataThis procedure describes how to save the Network Wide Backup & Restoreconfiguration data which allows the user to reuse configuration data during anew installation.RequirementsRead this requirements section and the entire procedure through once beforestarting the procedure.Before you start, you must:• Ensure that all controllers in the Backup & Restore user interface are in theidle stateActionStep Action1 Log in to the INM workstation asroot.2 Start the Backup & Restore administration script. Entercd /opt/nortel/inmbr3 Open the Backup & Restore administration menu. Enter./br_admin4 To save the configuration data, use menu option 1. Enter1A message prompts you to specify a .tar file.5 Specify a file name or press ↵ to accept the default file(/tmp/inmbr_config.tar).If there is no existing file, the save proceeds immediately.If there is an existing file, a message prompts you for confirmation to overwritean existing file.6 To proceed with the save operation and overwrite the file, enteryes ↵A message notifies you that the configuration data has been successfullysaved.—end—