Administration of Network Wide Backup & Restore 3-17Network Wide Backup & Restore User Guide 450-3101-031 Rel 1.0 Standard June 1999NTP Update Issue 1 July 19993Procedure 3-6Using the One Time Backup optionUse this procedure to add, edit, or delete a one time backup of a controller.Note: You cannot schedule a backup if a backup is in progress. The stateof the controller must be idle to schedule a backup.Refer to Figure 3-5, The One Time Backup tab on page 3-19.RequirementsBefore you start, you must• be at the Network Wide Backup & Restore window• select the One Time Backup tab• have admin privilegesActionStep Action1 Determine your action.2 Highlight the controller, in the Controller List, for which you want to edit a onetime backup.Go to step 4.3 Highlight the controller, in the Controller List, for which you want to delete aone time backup.Click on Clear.Click on Save.4 Determine the fields you want to edit.—continued—If you want to Then go toadd a one time backup step 5edit a one time backup step 2delete a one time backup step 3If you want to edit the Then go tostart date of the one time backup step 5start time of the one time backup step 6transfer rate of the one time backup step 7storage location of the backup step 8