3-10 Administration of Network Wide Backup & RestoreIntegrated Network Management 450-3101-031 Rel 1.0 Standard June 1999Procedure 3-4Restoring a backupUse this procedure to restore data to a controller.Refer to Figure 3-3, The Restore tab on page 3-12.RequirementsBefore you start, you must• refer to appropriate controllers’ NTPs for restoring from INM, and performany steps required before performing INM restore including requiredhardware replacements• be at the Network Wide Backup & Restore window• select the Restore tab• select a controller from the Controller List• have admin privilegesActionStep Action1 Determine the location of the backed up data.2 Click on the Recurring Storage Location: buttonThe default Recurring Storage Location is the root directory of the controller.Go to step 7.3 Click on the Custom Storage Location: button4 Click on Browse.5 Select the location that contains the backed up data.6 Click on OK.7 Select the storage location you want from the Storage Location list8 View the details of the backup from the Details list. Confirm that the selectedbackup is the one you want to restore.—continued—If the data is Then go toin the default location step 2not in the default location step 3