Digital Telephone IP Adapter Installation and Administration Guide 43January 2005 Digital Telephone IP Adapter descriptionTelephonesThis section lists the telephones, features, and modules supported by the DigitalTelephone IP Adapter unit.Supported digital telephonesDigital Telephone IP Adapter units support the following digital telephone setswith display:Your digital telephone must have a one or two-line display in order to configurethe Digital Telephone IP Adapter unit with the telephone display menu.Notes:1. Because it is a discontinued model, the M2616CT cordless digitaltelephone set is no longer supported.2. When you update the message on the host PBX that displays when thedigital telephone set is idle, you must unplug the digital telephone set andplug it back for the change to take effect.3. You must re-boot a Digital Telephone IP Adapter unit after unplugging andre-plugging the telephone cord of its associated digital telephone set.4. Auto Answer Back (AAB) activation on M26xx series digital telephonesets on Remote Gateway 9100 Series units connected to CS 2100 PBXsdoes not produce a dial tone. The digital telephone sets operate properly,but no dial tone is present. To produce dial tone in this situation, configurethe port on the RLC as a TAPI port.! M2008D ! M2616D ! M3902 ! M3905! M2008HFD ! M3310 ! M3903! M2216D ! M3820 ! M3904