80 Digital Telephone IP Adapter Installation and Administration GuideInstalling the Digital Telephone IP Adapter unit Standard 2.1Connecting the Digital Telephone External IP Adapter unit to thenetworkTo connect the Digital Telephone External IP Adapter unit to the network:1 Add the Digital Telephone External IP Adapter unit to your Ethernet networkby making the following connections:a. Connect one end of the Ethernet cable to the ETHERNET connector onthe Digital Telephone External IP Adapter unit.b. Connect the other end to either an Ethernet hub or a network router.2 Connect the Digital Telephone External IP Adapter unit to the power sourceas follows:a. Connect the appropriate plug on the power transformer to the powerconnector on the Digital Telephone External IP Adapter unit.b. Plug the power connector into an uninterruptible power supply (UPS) orwall outlet.3 Connect the Digital Telephone External IP Adapter unit to the digitaltelephone as follows:a. Connect one plug of the telephone cable supplied with the DigitalTelephone External IP Adapter unit to the jack marked DIGITALPHONE on the rear panel of the Digital Telephone External IP Adapterunit.b. Plug the other end of this cable to the jack on the digital telephone..WARNINGRisk of equipment damageTo prevent damage to the Digital Telephone External IPAdapter unit, ensure that the power source to the unit is turnedoff until you complete all connections.