Mediant 2000 SIPMediant 2000 SIP User’s Manual 216 Document #: LTRT-725044. Arrange the files according to your requirements by dragging and dropping them from onelocation in the list to another. Note that the sequence of the files determines their assignedVoice Prompt ID.Tip 1: Use the Play button to play wav files through your PC speakers.Tip 2: Use the Remove and Remove all buttons to delete files from the list.5. For each of the raw files, select a coder that corresponds with the coder it was originallyrecorded in by completing the following steps:¾ Double-click or right-click the required file(s); the ‘File Data’ window (shown in FigureG-4) appears.¾ From the ‘Coder’ drop-down list, select the required coder type.¾ In the ‘Description’ field, enter additional identifying information.¾ Close the ‘File Data’ window.Note that for wav files, a coder is automatically selected from the wav file’s header.Figure G-4: File Data Window6. In the ‘Output’ field, specify the output directory in which the Voice Prompts file is generatedfollowed by the name of the Voice Prompts file (the default name is voiceprompts.dat).7. Press the Make File(s) button; the Voice Prompts loadable file is produced.
